Flat and bend glass tempering furnace is based on flat glass tempering furnace with hard rollers bend tempering section, this structure can realize two-way reversible tempered glass production. Our hard roller bend tempering exclusively adopts the upper press roller and the lower drive roller synchronous power, arc changing process synchronous technology, to ensure the curved glass smooth and accurate without indentation; The 90 mm small roll spacing solves the phenomenon of straight section at both ends of the curved tempered glass arc. The air hole adopts narrow aluminum profile, and the gap between the roller and the air nozzle is large, which is conducive to cooling and exhaust air; A fine-tuning mechanism is designed for the arc adjusting sliding block of leeward grille, which is convenient to compensate the arc changing error and make the arc adjusting of leeward grille more accurate. Downwind grille roller table is changed to detachable structure for easy maintenance; The upper press roller is designed to drive the chain meshing wheel, which is not easy to slip. The orientation of the wind nozzle is controlled by the adjustable stroke cylinder, and the adjustment is more accurate and convenient. A set of scales is specially designed to observe the relationship between the position of the sliding block and the radian radius. Our equipment installed small, low energy consumption, easy to operate, easy to maintain; Bending and toughening forming accuracy, high repetition accuracy, can be used in the production of bend tempering and bend insulating glass characteristics in the industry, has been unanimously recognized and praised by users.
|
Model |
Max flat size（mm） | Max bend size（mm） | Min size（mm） | Thickness（mm） | Installed power（KVA） |
|
SH-FAB1225-06 |
1250 x 2500 |
1250 x 600 |
200 x 300 |
3 – 12 |
≥280 |
|
SH-FAB1525-08 |
1500 x 2500 |
1500 x 800 |
200 x 300 |
3.5-12 |
≥300 |
|
SH-FAB2025-08 |
2000 x 2500 |
2000 x 800 |
200 x 300 |
4 - 12 |
≥400 |
|
SH-FAB2232-12 |
2200 x 3200 |
2200 x 1200 |
300 x 350 |
4 - 12 |
≥500 |
|
SH-FAB2036-10 |
2000 x 3660 |
2000 x 1000 |
300 x 350 |
4 - 12 |
≥500 |
|
SH-FAB2042-10 |
2000 x 4200 |
2000 x 1000 |
300 x 350 |
4 - 12 |
≥550 |
|
SH-FAB2436-10 |
2440 x 3660 |
2440 x 1000 |
300 x 350 |
4 - 12 |
≥560 |
|
SH-FAB2436-15 |
2440 x 3660 |
2440 x 1500 |
300 x 500 |
5 - 12 |
≥560 |
|
SH-FAB2436-17 |
2440 x 3660 |
2440 x 1700 |
500 x 500 |
5 - 12 |
≥560 |
|
SH-FAB2442-20 |
2440 x 4200 |
2440 x 2000 |
500 x 600 |
5 - 19 |
≥630 |
|
SH-FAB2450-25 |
2440 x 5000 |
2440 x 2500 |
500 x 800
|
5 - 19 |
≥800 |
|
SH-FAB2460-25 |
2440 x 6000 |
2440 x 2500 |
500 x 800 |
5 - 19 |
≥1000 |
|
SH-FAB3060-25 |
3000 x 6000 |
3000 x 2500 |
500 x 800 |
5 - 19 |
≥1200 |
|
SH-FAB3360-25 |
3300 x 6000 |
3300 x 2500 |
500 x 800 |
5 - 19 |
≥1500 |
1.All above data is measured by millimeter.
2. Not all models are listed in this form for reason of space, please contact us for more details.
3. Power supply calculation is on the basis of 5mm glass, while furnace actual configuration is subject to practical glass thickness range and will be finally determined by both parties(customer and manufacturer).
4. Luoyang Easttec reserves all right to update data after technology innovations.
5. FAB series horizontal roller glass tempering furnace mainly used to make flat and bend tempering of low-e glass, architecture glass, furniture glass, appliance glass, shower room glass etc.
